This Week's Top Stories About Laser Cutting Wood

                This Week's Top Stories About Laser Cutting Wood

You must know laser cutting wood  

The use of laser cutting wood has the advantages of high precision, narrow slit, fast speed, and smooth cutting surface. However, since the laser focusing energy melts the board, there is a blackening phenomenon during the cutting process, that is, the edge of the cutting is carbonized.

How to reduce or even avoid this situation. The first thing to note is that if you cut a thicker board, it is difficult to get black. Everyone knows that to avoid the carbonization effect of laser cutting, it is correct to use high speed and low power, but some are misunderstood. They think that the faster the better, the lower the power, the better, in order to reduce blackening,

Multiple cuts with fast, low power. This is very bad, the carbonization effect may be darker than normal.

Our low power and speed must be guaranteed to cut through the wood at one time. The faster the better, the better the power. The lower the power, the better. The speed and power are determined according to the thickness of the plate. And if the power reduction requires multiple cuts,

In fact, the carbonization phenomenon is more serious. Because the part that has been cut through will be burned twice, the more the cut, the more serious the carbonization. The first cut through was burned once again during the second cut. The other part, because it was not cut through for the first time, was not so dark.

Therefore, the first thing to note is to ensure that in one processing, do not process twice, to avoid secondary damage.

The speed is fast and the power is contradictory. The faster the speed, the harder it is to cut through. The smaller the power, the harder it is to cut through. We have to prioritize between the two. Speed is much more important than low power. With a larger power, try the fastest cut-through speed.

Of course, in addition to the impact of power speed blackening, now, there is a very important factor, that is, blowing, cutting wood must strengthen the airflow, it is best to use high-power air compressor, the machine must be equipped with oil-water separator, in order to protect the focusing mirror Another factor that causes blackening and yellowing is that the gas produced by the cutting is blackened, and the blowing can assist the cutting to make cutting easier and prevent fire. If you find that it is black, it may be a material problem, and the glue content of the plywood will also affect. It is also very important to find suitable material.

Key points:

To ensure a one-time cut through, use fast, low power, and use the air compressor to assist in blowing.

amorsales@amorcnclaser.com 

www.amorlaser.com 

10 steps you must know to make a riding suit by the laser cutter

The cycling wear series refers to the cyclists' clothes from hats, headscarves, tops and trousers, gloves and the like. These clothes are more or less printed with trademarks or logos. The fabric used in the jersey is quick-drying, high-elastic, moisturizing and wicking. So what kind of cycling suits and what kind of function does the thermal transfer technology play in the cycling suit?

The first is the type of cycling clothing: according to the style, the jacket has short sleeves, long sleeves, jacket, vest, wind jacket; pants can be divided into shorts, trousers, suspender shorts, suspender trousers.

In particular, the trousers of the cycling the suit is mostly made of elastic Lycra fabric, and the functional trousers are added to the ankle to reduce the friction between the legs and the riding pants, which can prevent the inner side of the thigh from being worn.

Hitler once said: Military uniforms must be handsome, so that young people will be able to fight for the army!

It is said that when Hitler designed the military uniform for the SS stormtroopers, he made a special order: the German soldiers must wear the most beautiful and prestige of the world's military uniforms. The result is as the head of the head: like the beautiful slogan made by Goebbels, the beautiful military uniform, so that I don’t know how many German boys are arrogant and arrogant.

This sentence also applies to the riders, having a fit, durable, safe and handsome riding suit is a necessary condition for the rider to go forward without fear of danger. After the combination of handsome and cyclists, it is not just handsome.

So, how is a full-featured and handsome riding suit made? As a laser printed fabric cutting machine supplier, I was fortunate to be invited to visit the production process of the Monton Racing Land Rover Jersey (commonly known as Tiger Coat). There are many steps to be made to make a suit, and the selection, printing, cutting, etc. must be carefully and carefully produced.

First, start the first process of the Land Rover riding suit and print out the designed pattern.

2.Cut the lycra fabric of the jersey jacket according to the size (Leica fabric has the basic properties of natural fiber, has high resilience, is an authentic ecological fiber, and is derived from natural and superior to natural).

Laser machine cutting fabric

 3.Thermally transfer the cut lycra fabric and paper.

4. The great invention of thermal transfer technology will print the pattern on the fabric. Are you sure that you just saw the yellow Land Rover Jersey? Ladies and gentlemen, the next step is to witness the miracle!

5.The green Land Rover riding suit of the London team appeared! Is it green and very delicate and touching~ (The mission with drawings is completed here, and finally it will be recycled and reused, and riding should promote environmental protection)

6. Use the laser machine cutting with a camera cutting the patterns.

AMO1812 CAD Medium-Sized Vision Scanning Laser Cutter for Digital Printing Sportwear

7. Four-line edged in order for each piece of fabric printed with patterns (four-line edged is the strongest edge-cut method)

8.Ready to thread the thread

9.Sewing the back pocket, reflective strips and cuffs (the effect of the reflective strips during the night ride ensures a safer ride)

10. The back of the Land Rover Jersey is roughly shaped

The function of thermal transfer technology in cycling wear: Jerseys are roughly divided into two categories according to the production process: color matching riding suits and thermal transfer riding suits. Thermal transfer type cycling clothing: The characteristic is that the printed pattern is bright and color and any graphic can be printed on the cycling wear. It is not like a color matching riding suit, because there are too many pieces of cloth and sewing because of the style. Node; due to the cost of thermal transfer printing, the price is relatively higher compared to the color matching Jersey. Most of the jerseys now use thermal transfer printing (thermal transfer) technology.

Application of a laser cutting machine in cycling wear:

AMOR CNC Laser solves digital printing distortion problems with high-precision visual recognition algorithms and ultra-fine laser cutting technology. The whole version recognizes complex printing patterns and realizes continuous cutting, providing a complete technical solution for personalizing the flexible production chain cutting process. Solve the long-disturbing cutting problems of digital printing products, realize the automatic cutting of digital printing and solve the problem of cutting efficiency of customers' expansion of production capacity

Whether it is cutting and then sublimation printing or the sublimation printed fabrics are cut into rolls. the process of manual cutting is too complicated, the efficiency is too slow, the degree of artificial dependence is high, and the material is stretched and deformed, resulting in defective products.

The laser is non-contact cutting, very friendly to the elastic fabric, and equipped with two core functions: First, the visual positioning system, accurate search for the frame, accurate cutting; Second, automatic feeding device, automatic edge cutting.


amorsales@amorcnclaser.com 
AMOR CNC LASER

7 Things of Protection and maintenance you Must Know when using Laser/CNC Machine

The key to making the laser equipment work properly and stable is to do the daily maintenance and maintenance of the equipment. Good equipment maintenance can not only extend the service life of the machine, reduce the equipment failure rate, but also improve product quality. In order to make better use of this equipment, the following is a brief introduction to the daily maintenance and precautions of laser equipment:

1. Ground connection

Because the company's equipment contains sensitive power devices such as switching power supplies, laser power supplies, and filters, these components generate a certain degree of static

Laser machine manufacturer

interference during use. In order to minimize static interference and reduce a series of faults caused by static electricity, the following points should be noted before installing the equipment:

1.1 Whether the voltage is 220V if it is out of range or unstable, the regulator should be installed.

1.2 Whether the power socket is wired according to the left ‘zero’ right ‘fire’ standard, and the ground terminal should be reliable and completely grounded. If not, adjustments should be made.

1.3 Is there a ground wire that is reliably grounded at the customer's site (or an iron bar longer than one meter hits the ground and is completely grounded).

The equipment can be installed when the above conditions are met. When installing the equipment, due to the limited current capacity of the company's plug-in, do not install too much electrical equipment that is not related to the machine. In order to protect the personal safety of the operator and the ground wire of the normal working machine of the equipment, it must be grounded reliably under any circumstances.

2. Before starting the water, you must first, pass the water.

Also, check the water circulation during the working process of the machine to ensure the normal water circulation in the laser tube and protect the normal use of the laser tube.

3. Boot sequence

Follow the order of the machine's power on/off: the first turn on the water pump (water cooler), then turn on the power switch, and finally turn on the laser switch. Turn off the laser switch, turn off the power switch, and finally turn off the water pump (water cooler).

4. Control the temperature of the laser tube

Control the temperature of the water in the laser tube, generally, do not exceed 35 degrees. When using the machine in winter, drain the water in the tube to prevent freezing of the laser tube.

5. Cleaning of the lens

Keep the machine clean, especially the lens. If the lens is dirty, it will affect the reflection efficiency of the light, the processed sample and the life of the lens. When the lens is wiped, wipe it with a cotton swab and dry alcohol to prevent rubbing. The surface of the lens.

6. Pay attention to fire prevention

Do not place flammable or explosive materials in the laser reflection area and around the machine. Do not place reflective items on the platform.

7. Worker Management:

  During the processing, the operator must not leave the machine, always pay attention to the working state of the machine, in case of abnormal conditions, please immediately shut down the power.

AMOR CNC LASER 

www.amorlaser.com

How to choose automatic fabric cutting machine for customized production of sofa factory

The automated cutting of sofas has become an inevitable trend, and now the sofa factory must choose the equipment that best suits them. I have divided the sofa automatic cutting solution into large-volume and small-volume solutions according to output. Customers need to choose the solution that suits their needs according to their actual production capacity. There is no conflict between these two solutions. If the annual output is very large and the orders include both large-volume and small-volume customized orders, the factory owner can have two solutions to match production.

Because AMOR is a factory dedicated to providing customers with small-scale customized cutting solutions, as a sales engineer of AMOR, I can combine my years of experience in the sofa factory service to provide comprehensive guidance for your choice of equipment. If you need equipment suitable for small batches, please contact me.

The AMO1630 laser fabric cutting machine is an automatic cutting device designed for the continuous cutting of ultra-long cloth rolls. This model has been positioned as a professional cutting machine at the beginning of the process, so the working width of the machine is 1600mm. It can meet the cutting of most conventional sofa fabrics. The working width is 1600X3000mm, which can meet the cutting requirements of large sofa pieces. The model is used in more than 500 sofa factories around the world, including in China, Dubai, Canada, the United States, Greece, Serbia, Argentina, and Malaysia. Up until now, the AMO1630 automatic cutting machine has been updated to the fifth generation. It combines four core technologies of automatic feeding, automatic rectification, three-dimensional dust removal, and super-format cutting. The performance is more stable and the assembly more scientific. AMOR CNC not only provides intelligent cutting equipment for the sofa factory but also integrates the sofa paper sample digital conversion system and intelligent software management output system to provide a complete solution for the sofa factory to realize automatic cutting.

You want to know the laser fabric cutter price, please view www.amorlaser.com or contact amorsales@amorcnclaser.com 

Laser cutting machine for hollow fabrics with automatic cutting

Laser fabric cutting is different from cutting tools.
1, non-contact cutting fabric;
2, the laser beam is only 0.1mm.
It is very suitable for hollowing out fabrics, satisfying people's pursuit of fashion. Widely used in the hollow of clothing, shoes and other industries.
Advantages of laser hollow fabric or leather:
1, can be carved very small diameter holes, such as 1mm diameter of the empty;
2, the accuracy is extremely high, even if the engraving is very small, the accuracy is still high;
3, speed, customers can choose 2, 4 or more laser cutting heads, increase the speed of hollow fabric;
4, equipped with an automatic feeding system, continuous cutting into a roll of fabric.



Laser cutting machine for hollow fabrics. Contact Us：amorsales@amorcnclaser.com.Whatsapp:
8618863504017

laser cutting machine for filter fabric

Filter Cloth Laser Cutting Machine for Filtration Industry.AMOR Laser, a manufacturer of filter laser cutting machine, Co2 flatbed laser cutter, laser cutting filter cloth, filter mat, fiberglass, nonwoven fabric, textile, etc.
[Site: http://www.amorcnclaser.com ][Email:amorsales@amorcnclaser.com]

The advantages of laser cutting filter fabrics:
First, a more secure cutting method: Laser cutting of the filter cloth can automatically lock the edge, which is a safer and more efficient cutting method, especially in the cutting of fiberglass cloth.

Second, high-precision cutting: filter materials require more and more detailed pores, especially in the micro-hole processing, the traditional way is difficult to reach the established requirements. The laser can cut various patterns for the filter cloth.
       

Third, the cutting cost of the filter cloth is reduced: through the laser cutting of the filter cloth, the use of automated processing reduces the number of production processes, one forming, satisfies the requirements of the cutting, drilling, trimming of the filter cloth, and reduces the production cost.

Core configuration:
Automatic feeding system: With the function of automatically correcting the feeding accuracy, the entire roll of filter cloth can be continuously cut.

Feeding belts: The automatic feeding platform breaks the limit of the length of the machine facing the cutting fabric and realizes the ultra-wide cutting of the fabric.

Automatic marker software: Intelligent marker software, fast cutting material typesetting for cutting graphics.

Vacuum Adsorption Platform: Utilizing a honeycombed honeycomb platform, the suction force of the suction fan on the fabric is increased, and the material is firmly fixed on the platform.

Wrap-around smoking system: With the on-draft ventilation system, the laser head is synchronized with the smoking system, the smoke exhausting effect is good, the energy saving is reduced, the cleaning is safe, and the cutting site is free from any smoke and dust.

Three Things You Need to Know Before Buying an Automatic Fabric Cutting Machine

 Three Things You Need to Know Before Buying an Automatic Fabric Cutting Machine

There are four major sofa production bases in China: Foshan in Guangdong, Chengdu in Sichuan, Xianghe in Hebei and Zibo in Shandong. These four production bases make up about 70% of the sofas produced in China. AMOR has offices in all four cities and has supplied the factories with more than 400 automatic fabric cutting machines.

Our customers recognize that our automatic cutting machines have helped to solve production problems throughout the industry. We were not the first automatic cutting machine manufacturer to enter the sofa industry, but we made the first machine that was completely suitable for the production of sofas.

Firstly, a significant innovation was the introduction of the automatic fabric laying correction system. Cutting fabric for sofas has three major difficulties: the cutting length of the fabric being more than 10m (for some sofas, 15m); a variety of fabric cutting; and a number of patterns (solved by intelligent software).

The original sofa cloth cutting machine could not feed the fabric accurately, so a long working table was used. Although this version of the equipment allowed mechanized fabric processing, the fabric still needed to be laid manually and labor costs were not reduced. Also, because the machine used a splicing method, after a long period of use, the platform was prone to collapsing, and the continuous cutting of fabric on a long working table lessened its stability. This type of machine could not achieve full automation in the production of sofas and was simply taking up space at the factory.

AMOR learned of this situation, put all of its research and development resources into finding a solution and created a fully automated system to spread fabric for accurate feeding and to overcome the obstacle of elastic fabric stretching out of shape during the feeding process.

Due to the successful development of automatic spreading, the cutting of sofa cloth is no longer limited by length. Theoretically, the size of the cloth to be cut is unlimited, efficiency is improved and only one person is needed to pick up the pieces of cloth during the entire cutting process. 

Secondly, in addition to the brilliantly imaginative machine itself, intelligent processing software is needed to manufacture different models of sofas.

1.    The software is equipped with an ultra-fast size-changing function. In one minute, the size of the sofa can be longer or shorter or customized according to a customer’s wishes.

2.    You can set the cutting direction of the fabric according to the requirements of the sofa being produced.

3.    Can be achieved between the two sets of different patterns of sofa exchange, only one key copy can be achieved sofa model management, without the complexity of paper model management

4.    In two minutes, you can achieve rapid nesting to provide customers with the best nesting plan that will save about five percent of the fabric.

Thirdly, based on the actual production process, customers recommend practical solutions. Customers want equipment that meets the needs of their particular production conditions. They don’t want to just throw a dart and see where it lands, and they don’t want to spend money on equipment that ends up being useless to them, like the client who bought an expensive multi-layer cutting machine only to find that it was not suitable for his business because most of his orders were custom or small batch (less than 20 sets). The multilayer was too expensive to operate for the low volume and custom orders. suitable for more than 20 layers of fabric cutting, cannot meet the low volume and custom orders His machine sits idle.

So how do customers buy the correct equipment? According to our experience, we propose that they cannot simply consider their annual output, but must factor in the types of orders: high-volume orders, small quantities, and customized orders.

The MCK CNC machine works best for high-volume orders (needing more than 30 layers of fabric cut) with an annual output of 15,000 sets of sofas. The capital investment is large, but this equipment will definitely optimize production.

The SFK CNC machine is suitable for small quantities of orders needing 20 layers of fabric cut and an annual output of more than 6,000 sets. The SFK can meet single-layer cutting and 4-6 layers of fabric. The SFK reduces the input costs and is a good solution to small batch production orders. The MCK machine is too expensive to operate in this situation. 

The SCL and SFK machines are suitable for single-volume and single-cut orders with an annual output of about 3,000 sets. They are excellent solutions for customized orders.

The above principles can be used as guidelines by customers. AMOR is always happy to consult with customers and provide our expertise in the sofa industry. More than anything, we want you to find the perfect automated cutting solution for your business.