This Week's Top Stories About Laser Cutting Wood

                This Week's Top Stories About Laser Cutting Wood

You must know laser cutting wood  

The use of laser cutting wood has the advantages of high precision, narrow slit, fast speed, and smooth cutting surface. However, since the laser focusing energy melts the board, there is a blackening phenomenon during the cutting process, that is, the edge of the cutting is carbonized.

How to reduce or even avoid this situation. The first thing to note is that if you cut a thicker board, it is difficult to get black. Everyone knows that to avoid the carbonization effect of laser cutting, it is correct to use high speed and low power, but some are misunderstood. They think that the faster the better, the lower the power, the better, in order to reduce blackening,

Multiple cuts with fast, low power. This is very bad, the carbonization effect may be darker than normal.

Our low power and speed must be guaranteed to cut through the wood at one time. The faster the better, the better the power. The lower the power, the better. The speed and power are determined according to the thickness of the plate. And if the power reduction requires multiple cuts,

In fact, the carbonization phenomenon is more serious. Because the part that has been cut through will be burned twice, the more the cut, the more serious the carbonization. The first cut through was burned once again during the second cut. The other part, because it was not cut through for the first time, was not so dark.

Therefore, the first thing to note is to ensure that in one processing, do not process twice, to avoid secondary damage.

The speed is fast and the power is contradictory. The faster the speed, the harder it is to cut through. The smaller the power, the harder it is to cut through. We have to prioritize between the two. Speed is much more important than low power. With a larger power, try the fastest cut-through speed.

Of course, in addition to the impact of power speed blackening, now, there is a very important factor, that is, blowing, cutting wood must strengthen the airflow, it is best to use high-power air compressor, the machine must be equipped with oil-water separator, in order to protect the focusing mirror Another factor that causes blackening and yellowing is that the gas produced by the cutting is blackened, and the blowing can assist the cutting to make cutting easier and prevent fire. If you find that it is black, it may be a material problem, and the glue content of the plywood will also affect. It is also very important to find suitable material.

Key points:

To ensure a one-time cut through, use fast, low power, and use the air compressor to assist in blowing.

amorsales@amorcnclaser.com 

www.amorlaser.com 

10 steps you must know to make a riding suit by the laser cutter

The cycling wear series refers to the cyclists' clothes from hats, headscarves, tops and trousers, gloves and the like. These clothes are more or less printed with trademarks or logos. The fabric used in the jersey is quick-drying, high-elastic, moisturizing and wicking. So what kind of cycling suits and what kind of function does the thermal transfer technology play in the cycling suit?

The first is the type of cycling clothing: according to the style, the jacket has short sleeves, long sleeves, jacket, vest, wind jacket; pants can be divided into shorts, trousers, suspender shorts, suspender trousers.

In particular, the trousers of the cycling the suit is mostly made of elastic Lycra fabric, and the functional trousers are added to the ankle to reduce the friction between the legs and the riding pants, which can prevent the inner side of the thigh from being worn.

Hitler once said: Military uniforms must be handsome, so that young people will be able to fight for the army!

It is said that when Hitler designed the military uniform for the SS stormtroopers, he made a special order: the German soldiers must wear the most beautiful and prestige of the world's military uniforms. The result is as the head of the head: like the beautiful slogan made by Goebbels, the beautiful military uniform, so that I don’t know how many German boys are arrogant and arrogant.

This sentence also applies to the riders, having a fit, durable, safe and handsome riding suit is a necessary condition for the rider to go forward without fear of danger. After the combination of handsome and cyclists, it is not just handsome.

So, how is a full-featured and handsome riding suit made? As a laser printed fabric cutting machine supplier, I was fortunate to be invited to visit the production process of the Monton Racing Land Rover Jersey (commonly known as Tiger Coat). There are many steps to be made to make a suit, and the selection, printing, cutting, etc. must be carefully and carefully produced.

First, start the first process of the Land Rover riding suit and print out the designed pattern.

2.Cut the lycra fabric of the jersey jacket according to the size (Leica fabric has the basic properties of natural fiber, has high resilience, is an authentic ecological fiber, and is derived from natural and superior to natural).

Laser machine cutting fabric

 3.Thermally transfer the cut lycra fabric and paper.

4. The great invention of thermal transfer technology will print the pattern on the fabric. Are you sure that you just saw the yellow Land Rover Jersey? Ladies and gentlemen, the next step is to witness the miracle!

5.The green Land Rover riding suit of the London team appeared! Is it green and very delicate and touching~ (The mission with drawings is completed here, and finally it will be recycled and reused, and riding should promote environmental protection)

6. Use the laser machine cutting with a camera cutting the patterns.

AMO1812 CAD Medium-Sized Vision Scanning Laser Cutter for Digital Printing Sportwear

7. Four-line edged in order for each piece of fabric printed with patterns (four-line edged is the strongest edge-cut method)

8.Ready to thread the thread

9.Sewing the back pocket, reflective strips and cuffs (the effect of the reflective strips during the night ride ensures a safer ride)

10. The back of the Land Rover Jersey is roughly shaped

The function of thermal transfer technology in cycling wear: Jerseys are roughly divided into two categories according to the production process: color matching riding suits and thermal transfer riding suits. Thermal transfer type cycling clothing: The characteristic is that the printed pattern is bright and color and any graphic can be printed on the cycling wear. It is not like a color matching riding suit, because there are too many pieces of cloth and sewing because of the style. Node; due to the cost of thermal transfer printing, the price is relatively higher compared to the color matching Jersey. Most of the jerseys now use thermal transfer printing (thermal transfer) technology.

Application of a laser cutting machine in cycling wear:

AMOR CNC Laser solves digital printing distortion problems with high-precision visual recognition algorithms and ultra-fine laser cutting technology. The whole version recognizes complex printing patterns and realizes continuous cutting, providing a complete technical solution for personalizing the flexible production chain cutting process. Solve the long-disturbing cutting problems of digital printing products, realize the automatic cutting of digital printing and solve the problem of cutting efficiency of customers' expansion of production capacity

Whether it is cutting and then sublimation printing or the sublimation printed fabrics are cut into rolls. the process of manual cutting is too complicated, the efficiency is too slow, the degree of artificial dependence is high, and the material is stretched and deformed, resulting in defective products.

The laser is non-contact cutting, very friendly to the elastic fabric, and equipped with two core functions: First, the visual positioning system, accurate search for the frame, accurate cutting; Second, automatic feeding device, automatic edge cutting.


amorsales@amorcnclaser.com 
AMOR CNC LASER