2016年12月14日星期三

Sofa wood cross brace laser engraving machine

       Sofa wood cross brace laser engraving machine                              


People have become more and more attention to the aesthetic of the sofa, not only need to look good-looking, from design in terms of human needs. Therefore, the sandwiched compartment is also enriched.

Sofa cross brace laser engraving machine is mainly used in the sofa wood carving ,sofa with laser manufacturers name, logo , as well as some of the size of the sofa, etc., can improve product quality.

The traditional sofa cross stays using screen printing or stamping the way, can not be very specific to show some of the parameters of the sofa, only a simple indication of the company name, warranty.






Laser engraving sofa cross brace, according to the complexity of the template efficiency in 30s to 1 minute.
                                                                                            

Wood is by far the most commonly used laser processing materials, it is easy to carve and cut. Light wood like birch, cherry or maple is very good gasification by laser, which is more suitable for sculpture. Each wood has its own characteristics, some dense, such as hardwood, in the carving or cutting is necessary to use a larger laser power.
Plywood
In fact, carved plywood and wood carving is not much difference, but one thing to note, carving depth is not too deep. The edge of the cut plywood will be as black as wood, the key is to see if the use of plywood is made of wood.

Wood carving
In general, the wood carving is usually Yin carving, and carving depth generally require deeper. This power is generally set higher, such as hard wood encountered may make the graphics after carving the color becomes darker. If you want to make the color lighter, can increase the speed of engraving, try to carve a few times.


www.amorcnclaser.com  
Amor CNC Laser

没有评论:

发表评论