1.Theoretical knowledge: Training must start from theoretical of machine,the operator must pass the theoretical examination.
2.Useing of engraving machine tool: The operator must be clear of common tools, carving motor speed, travel speed, and precautions, the operator must be familiar with the tool applications.
3.Application of the material: The operator must be familiar with the range of application of various materials, different thicknesses, different size of the finished product. Familiar with different engraving ways.
4.The software operation: Training software focused in the areas of user applications; software requirements: Various typesetting of software, a variety of operations, the path ,can quickly find the wrong path and so on.
5.Machine operator training: Training for safe operation
and CNC Router machine maintenance training
CNC Engraving machine operating note:
1. Do not install this equipment during lightning or thunder, do not install power outlets in damp places, do not touch uninsulated power lines.
2. The operator must go through a rigorous training procedure must pay attention to personal safety and the safety of the machine, and strictly follow the rules to operate engraving machine.
3. If the power supply voltage instability or surrounded by high-power electrical equipment, be sure to select the power supply under the guidance of professional and technical personnel.
4. CNC Router machine, control cabinet must be grounded wire, not hot-plug the data cable.
5. Operating personnel must not wear gloves work ,best to wear protective goggles.
6. Mechanical body for the steel gantry part aerospace aluminum casting, relatively soft, in the mounting screws (especially the installation carving motors) Do not be too hard to slip wire.
7. The tool must be installed and clamped, keeping knives sharp, blunt instrument engraving quality will decrease the motor overload.
8. Do not put your finger in the tool scope of work, do not carve head removed for other purposes. Non-processed materials including stone white cotton.
9. Do not exceed the machining range, to cut off the power when the long inoperative, the machine moves, there must be carried out under the guidance of professional presence.
10. The machine abnormal situation, please refer to the operating manual troubleshooting chapter or contact your dealer to resolve; to avoid man-made damage.
-----Amor CNC Laser.com
amorsales@amorcnclaser.com
没有评论:
发表评论